Clear Vlan Counters - Cisco 4500M Command Reference Manual

clear vlan counters

clear vlan counters
To clear the software-cached counter values to start from zero again for a specified VLAN or all existing
VLANs, use the clear vlan counters command.
Syntax Description
vlan-id
Defaults
This command has no default settings.
Command Modes
Privileged EXEC
Command History Release
12.1(13)EW
Usage Guidelines
If you do not specify a vlan-id value; the software-cached counter values for all existing VLANs are
cleared.
Examples
This example shows how to clear the software-cached counter values for a specific VLAN:
Switch# clear vlan 10 counters
Clear "show vlan" counters on this vlan [confirm]y
Switch#
Related Commands
show vlan counters
Catalyst4500 Series SwitchCiscoIOS Command Reference—Release 12.2(18)EW
2-40
clear vlan [vlan-id] counters
(Optional) VLAN number; see "Usage Guidelines" for valid values.
Modification
Support for this command was introduced on the Catalyst4500 series switches.
Chapter2 Cisco IOS Commands for the Catalyst 4500 Series Switches
78-16201-01