Override Tags (Speed Axis); Statusdrive Tags (Speed Axis) - Siemens SIMATIC S7-1500 Function Manual

A.1.8

Override tags (speed axis)

The tag structure <TO>.Override.<tag name> contains the configuration for the override
parameters. The override parameters are used to apply a correction percentage to default
values. An override change takes effect immediately, and is performed with the dynamic
settings in effect in the Motion Control instruction.
Tags
Legend (Page 321)
Tag
Override.
Velocity
A.1.9

StatusDrive tags (speed axis)

The tag structure <TO>.StatusDrive.<tag name> indicates the status of the drive.
Tags
Legend (Page 321)
Tag
StatusDrive.
InOperation
CommunicationOK
Error
S7-1500 Motion Control V13 Update 3
Function Manual, 07/2014, A5E03879256-AC
Data type Values
STRUCT
LREAL 0.0 to 200.0%
Data type Values
STRUCT
BOOL -
BOOL -
BOOL -
A.1 Tags of the technology object SpeedAxis
W Description
DIR Velocity or speed override
Percentage correction of the velocity/speed
W Description
RON Operational status of the drive
FALSE: Drive not ready. Setpoints will not be exe-
cuted.
TRUE: Drive ready. Setpoints can be executed.
RON Cyclic BUS communication between controller and
drive
FALSE: Not established
TRUE: Established
RON FALSE: No error at the drive
TRUE: Error at the drive
Appendix
325