Mc_Moverelative; Mc_Moverelative: Relative Positioning Of Axes V2 - Siemens SIMATIC S7-1500 Function Manual
Update 3
Hide thumbs
Also See for SIMATIC S7-1500:
- System manual (393 pages) ,
- Function manual (362 pages) ,
- Manual (188 pages)
Table of Contents
Advertisement
The running "MC_MoveVelocity" job (A2) is overridden by another "MC_MoveVelocity" job
(A1). The abort is signaled via "Abort_2". The axis is accelerated to the new setpoint velocity
50.0. Before the setpoint velocity is reached, the current "MC_MoveVelocity" job A1) is
overridden at time
"Abort_1". When the new setpoint velocity 15.0 is reached, this is signaled via "InVel_2". The
axis then continues moving at the constant velocity 15.0.
11.1.5
MC_MoveRelative
11.1.5.1
MC_MoveRelative: Relative positioning of axes V2
Description
With the Motion Control instruction "MC_MoveRelative", you can move an axis relative to the
position that exists at the beginning of job processing.
Dynamic behavior during movement is defined with the parameters "Velocity", "Jerk",
"Acceleration" and "Deceleration".
Applies to
● Synchronous axis
● Positioning axis
Requirements
● The technology object has been configured correctly.
● The technology object is enabled.
S7-1500 Motion Control V13 Update 3
Function Manual, 07/2014, A5E03879256-AC
③
by another "MC_MoveVelocity" job A2). The abort is signaled via
Instructions
11.1 S7-1500 Motion Control V2
255
Advertisement
Table of Contents
