Working With The Parameter View; Overview; Filtering The Parameter Table - Siemens SIMATIC S7-1500 Function Manual

Configuring
6.8 Parameter view
6.8.4

Working with the parameter view

6.8.4.1

Overview

The following table provides an overview of the functions of the Parameter view in online and
offline mode described in the following.
● Column "Offline" = X: This function is possible in offline mode.
● Column "Online" = X: This function is possible in online mode.
Function/action
Filtering the parameter table (Page 164)
Sorting the parameter table (Page 165)
Transferring parameter data to other editors (Page 165)
Indicating errors (Page 166)
Editing start values in the project (Page 166)
Monitoring values online in the parameter view (Page 168)
Modifying values (Page 169)
Comparing values (Page 170)
6.8.4.2

Filtering the parameter table

You can filter the parameters in the parameter table in the following ways:
● With the text filter
● With the subgroups of the navigation
Both filter methods can be used simultaneously.
With the text filter
Texts that are visible in the parameter table can be filtered. This means only texts in
displayed parameter rows and columns can be filtered.
1. Enter the desired character string for filtering in the "Text filter..." input box.
The parameter table displays only the parameters containing the character string.
The text filtering is reset.
● When another parameter group is selected in the navigation.
● When navigation is changed from data navigation to functional navigation, or vice versa.
With the subgroups of the navigation
1. Click the desired parameter group in the navigation, e.g., "Static".
The parameter table only shows the static parameters. You can select further subgroups
for some groups of the navigation.
2. Click "All parameters" in the navigation if all parameters are to be shown again.
164
Offline
X
X
X
X
X
S7-1500 Motion Control V13 Update 3
Function Manual, 07/2014, A5E03879256-AC
Online
X
X
X
X
X
X
X
X