Technology Alarms - Siemens SIMATIC S7-1500 Function Manual
Update 3
Hide thumbs
Also See for SIMATIC S7-1500:
- System manual (523 pages) ,
- Function manual (362 pages) ,
- Manual (188 pages)
Table of Contents
Advertisement
10.3
Technology alarms
Description
If an error occurs at a technology object (e.g. approaching a hardware limit switch), then a
technology alarm is triggered and indicated. The impact of a technology alarm on the
technology object is specified by the alarm reaction.
Alarm classes
Technology alarms are divided into three classes:
● Warning (can be acknowledged)
● Alarm (must be acknowledged)
● Fatal error
S7-1500 Motion Control V13 Update 3
Function Manual, 07/2014, A5E03879256-AC
The processing of Motion Control jobs continues. The current motion of the axis can be
influenced, e.g. by limitation of the current dynamic values to the configured limit values.
Motion jobs are aborted in accordance with the alarm reaction. In order to continue job
processing after resolving the cause of error, you must acknowledge the alarms.
Motion jobs are aborted in accordance with the alarm reaction.
To be able to use the technology object again after eliminating the problem, you will need
to restart the technology object (Page 197).
Diagnostics
10.3 Technology alarms
215
Advertisement
Table of Contents
