Symmetricom TimeProvider 5000 User Manual page 340

Chapter 4 Provisioning
Provisioning Expansion Shelf E1 / 1PPS+TOD Outputs
3. Type
set output-exp pps-tod state exp1 all enable
Output Generation Behavior
Output generation behavior can be configured independently for individual ports or
the same behavior can be configured for all 1PPS+TOD ports on the specified
expansion shelf.
1. Login at the Admin or Config-user level.
2. Type
set output-exp pps-tod warm-up exp0 all squelch
3. Type
set output-exp pps-tod free-run exp0 port 7 squelch
Enter.
4. Type
set output-exp pps-tod holdover exp0 all on
5. Type
set output-exp pps-tod fast-track exp0 port 5 squelch
press Enter.
340 TimeProvider 5000 User's Guide
and press Enter.
and press Enter.
and press
and press Enter.
and
098-00028-000 Revision F – May, 2012