Overview - Symmetricom TimeProvider 5000 User Manual

Appendix F PTP Probe Option
This appendix describes the procedures for installing, provisioning, and operating
the TimeProvider 5000 in Probe mode.
In This Appendix

Overview


Requirements for Measurements

Installing the Probe

Controlling the Probe With TimeMonitor PDV

Provisioning the Probe

– Enable the Probe Option on the TP 5000
– Enable Port as a PTP Probe
– Return Port to Grandmaster Mode
– Set the IP Address for Probe MGMT Port
– Set Probe IP Address
– Set Grandmaster PTP IP Address
– Set Synchronization Interval
– Set Lease Duration
Operating the Probe

Probe Data

Analyzing Probe Data

098-00028-000 Revision F – May, 2012 TimeProvider 5000 User's Guide 495