Functions Of Timemonitor Pdv - Symmetricom TimeProvider 5000 User Manual

Table F-2. Descriptions of TimeMonitor PDV GUI
Item Label
Command
Title Bar
Message
Main Display

Functions of TimeMonitor PDV

TimeMonitor PDV has four basic functions:
1. Connect
2. Configure
3. Measure
4. Analyze
These functions are shown in
098-00028-000 Revision F – May, 2012

Main Screen (Continued)
This field is used to manually enter CLI commands for the Probe.
TimeMonitor PDV must be in Command mode (see Item 1) to use this
feature. Click the Send button (see Item 25) to send the command to
the Probe.
Shows the product name. The cursor has a pointer shape in this area.
If live data is being collected, then the Elapsed Time is shown.
Probe measurement data points are displayed in this section when the
Check button (see Item 2) is pressed, as well as any responses or
messages from the TP 5000 probe during a CLI session.
Figure F-7
Appendix F PTP Probe Option
Controlling the Probe With TimeMonitor PDV
Description
and described in Table
TimeProvider 5000 User's Guide 505
F-3: