Symmetricom TimeProvider 5000 User Manual page 163

set ip-mode
Use this command to set the DHCP mode for the IMC Ethernet interface. You can
set up the interface to use either DHCP or a static IP.
Command Syntax:
set ip-mode imc {dhcp|static}
Example:
tp5000> set ip-mode imc dhcp
Remarks: Use
Level : Config and Admin only
098-00028-000 Revision F – May, 2012
to restart the interface after configuring the system.
set ip
Chapter 3
TimeProvider 5000 CLI Command Set
TimeProvider 5000 User's Guide 163