Module Led Descriptions - Symmetricom TimeProvider 5000 User Manual

Chapter 2 Installing
Applying Power to the TimeProvider 5000
Table 2-15. Module LED Descriptions
LED
Power
Module Power Indicator
-48V A-Bus
A-Bus Battery Indicator
-48V B-Bus
B-Bus Battery Indicator
System Health
Aggregation of system alarms
indicator
IMC Alarm
IMC module alarm/fault indicator
GNSS/GPS Status
GPS engine status indicator
Ethernet Management Port
LEDs on the Ethernet connector
Expansion Port
LEDs on the RJ48 connector
Power
Module Power Indicator
90 TimeProvider 5000 User's Guide
Label
IMC Module
PWR Green - Module power available
Off - Module power not available
BT A Off - A-Bus power OK
Red - A-Bus power failed
BT B Off - B-Bus power OK
Red - B-Bus power failed
SYS Off - System operating normally
Amber - System operational Minor Alarm(s)
Red - System operational Major or Critical Alarm(s)
ALM Off - IMC operating normally
Amber - IMC operational Minor Alarm(s)
Red - IMC operational Major/Critical Alarm(s)
Flashing Green - Software starting up
GNSS/ Green - GPS enabled and GPS engine/interface is
GPS operating normally
Amber - GPS enabled and GPS engine or antenna
interface has operational issues
Off - GPS disabled
MGMT Left Flashing Amber - Activity
Left Off - No Activity
Right Green - Link has been established
Right Off - Link has not been established
EXP Left OFF - No DTI client detected
Left Amber - DTI client detected
Left Green - DTI client detected and ready
Right OFF- Link has not been established
Right Green - Link has been established
Right Flashing Green - Activity
IOC Module
PWR Green - Module power available
Off - Module power not available
Description
098-00028-000 Revision F – May, 2012