Show Hostname; Set Hostname - Symmetricom TimeProvider 5000 User Manual

Chapter 3
TimeProvider 5000 CLI Command Set

show hostname

This command displays the host name for the TimeProvider 5000.
Command Syntax:
show hostname
Example:
tp5000> show hostname
Response
Host name
Level : User, Config, and Admin

set hostname

This command sets the host name for the TimeProvider 5000. Hostname can
contain up to 20 characters.
Command Syntax:
set hostname <hostname_string>
Example:
To set the hostname to "PTPhost3" 
tp5000> set hostname PTPhost3
Level : Config and Admin only
Note: The hostname will be used for the SNMP sysName object.
However, if sysName is changed via SNMP, SNMP will then use the
updated value until the next restart of SNMP, but hostname will not be
changed.
144 TimeProvider 5000 User's Guide
- TP5000
098-00028-000 Revision F – May, 2012