Gps, Gnss, And Input Port Parameters - Symmetricom TimeProvider 5000 User Manual

Appendix B Specifications and Factory Defaults
Factory Defaults
Table B-19. General and Communication Parameters (Continued)
Description
Local Alarm Log Buffer Size
Local Event Log Buffer Size
Local Command Log Buffer
Size
Local Security Log Buffer
Size
Auto-Sync
Bridging Time
Table B-20. GPS, GNSS, and Input Port Parameters
Description
GPS State
GPS Priority
GPS Antenna Cable Delay
GPS Position Mode
GPS Position
GPS Elevation Mask
GPS PQL State
GPS PQL Value
GNSS State
GNSS Priority
GNSS Antenna Cable Delay
GNSS Position Mode
450 TimeProvider 5000 User's Guide
Default Value
100
100
100
100
Enable
900
Default Value
Enable
2
0
Auto
Lat -
N37:22:43.425
Long -
W121:55:34.815
Elevation - 13.7m ELEV= ±hhhh.h height in meters,
10
Disable
1
Enable
1
0
Auto
Value Range
0 to 100 Kbytes
0 to 100 Kbytes
0 to 100 Kbytes
0 to 100 Kbytes
Enable | Disable
100 to 100000
Value Range
Enable | Disable
1 to 16
0 to 999,999 ns
Auto | Manual
LAT = Ndd:mm:ss.ss or
Sdd:mm:ss.sss
LONG = Eddd:mm:ss.ss or
Wddd:mm:ss.sss
-999.9 to 40,000.0 meters
5 to 45 degrees
Enable | Disable
1 to 3
Enable | Disable
1 to 16
0 to 65,485 ns
Auto | Manual
098-00028-000 Revision F – May, 2012