show snmp
Use these commands to display the SNMP Manager assigned to the agent, all
assigned users (username only), and the SNMP trap version and SNMP trap user.
Command Syntax:
To display the SNMP manager assignment:
show snmp manager
To display the SNMPv3 user configuration:
show snmp user
To display the SNMP TRAP user information (user names only):
show snmp trapuser
To display the SNMP v2-community information:
show snmp v2-community
To display the SNMP TRAP version information:
show snmp trapversion
To display the SNMP V2 state:
show snmp state-v2
To display the SNMP trap MIB has been selected:
show snmp trap-mib
To display which SNMP MIB version, 1.2 or 2.0, has been selected:
show snmp sys-obj-mib
Example 1:
tp5000> show snmp manager
Response 1:
-----------------------------------------------------------------------------
|Index|Manager ID
|-----|---------------|--------------------|--------------------------------|
|1
|m192.168.5.187 |192.168.5.187
|.....|...............|....................|................................|
|2
|m192.168.5.144 |192.168.5.144
|.....|...............|....................|................................|
|3
|m192.168.5.171 |192.168.5.171
|-----------------------------------------------------------------------------
Example 2:
tp5000> show snmp user
098-00028-000 Revision F – May, 2012
|Manager Addr
TimeProvider 5000 CLI Command Set
|Engine ID
|0x63000000a1c0a805bb
|0x0123456789010384
|0x63000000a1c0a805bb
TimeProvider 5000 User's Guide 239
Chapter 3
|
|
|
|