Gps L1 Inline Amplifier Specifications - Symmetricom TimeProvider 5000 User Manual

Table C-4. FCC-250B-90-1.5NFNF Specifications (Continued)
Characteristic
Insertion Loss
VSWR
DC Breakdown Voltage
Dissipation Capacity
Connector Type
Temperature
Relative Humidity
Altitude
GPS L1 Inline Amplifier
The GPS L1 Inline Amplifier (570704-0002) option boosts the signal from the
antenna. Use this amplifier on LMR-400 cables that are longer than 650 feet; it
receives power from the GPS radio receiver through the antenna coaxial cable
connections.
amplifier.
Table C-5. GPS L1 Inline Amplifier Specifications
Characteristic
Connectors, (In/Out)
Gain
Dimensions, includes connectors
Power
Current
Noise Factor
098-00028-000 Revision F – May, 2012
< 0.25dB @ 1,575 MHz
< 1.6:1 @ 1,575 MHz
90 Volts
10,000 Amperes, impulse 8/20 µsec
N-Type
–55C to + 70C
100% Non-immersed
200 ft. (60 m) below sea level to 13 000 ft. (3962 m) above
sea level
Table C-5 provides mechanical and electrical specifications for the
N-Type
20 dB  2 dB
Length: 3.77 in (9.6 cm)
+4 VDC to +28 VDC
< 10 mA
< 3 dB
Appendix C Installing the GPS Antenna
Specification
Specification
Mechanical
Electrical
TimeProvider 5000 User's Guide 471
Antenna Kits and Accessories