Rack Mounting The Tp E30 Expansion Shelf; Working With Modules - Symmetricom TimeProvider 5000 User Manual

Figure 2-13. Rack Mounting the TP E30 Expansion Shelf

Working With Modules

This section describes how to install, remove, and handle the modules associated
with the TimeProvider 5000.
Handling Modules
When handling any of the modules, observe the following precautions:
1. Use proper static control precautions when handling modules! Protect the
equipment against ESD (electrostatic discharge) by using a grounded protective
wrist strap and normal equipment grounding.
2. Avoid touching component leads and edge connectors.
3. Avoid placing the module on an ungrounded surface.
4. Avoid allowing the module to come in contact with insulated surfaces.
098-00028-000 Revision F – May, 2012
Chapter 2 Installing
Working With Modules
TimeProvider 5000 User's Guide 67