Telecom Input / Output Parameters - Symmetricom TimeProvider 5000 User Manual

Appendix B Specifications and Factory Defaults
Factory Defaults
Table B-20. GPS, GNSS, and Input Port Parameters (Continued)
Description
Telecom Input Port 1 SSM Bit
Telecom Input Port 1 SSM PQL
Value
Telecom Input Port 2 State
Telecom Input Port 2 Priority
Telecom Input Port 2 Frame
Type
Telecom Input Port 2 CRC
Telecom Input Port 2 SSM
State
Telecom Input Port 2 SSM Bit
Telecom Input Port 2 SSM PQL
Value
Note: The reference criteria MANUAL is no longer supported. Only
PRIORITY and SSM are supported for reference selection.
Manual selection of a reference input can be done by disabling all
reference input ports except the desired one.
The "set ref override" command is no longer supported.
Table B-21. Telecom Input / Output Parameters
Description
Telecom IO Port 1
Telecom IO Port 2
452 TimeProvider 5000 User's Guide
Default Value
8
3
Enable
8
freq2048khz
freq2048khz | freq1544khz
Disable
Disable
8
3
Default Value
Input Input | Output
Input Input | Output
098-00028-000 Revision F – May, 2012
Value Range
4 | 5 | 6 | 7 | 8
1 to 9
Enable | Disable
1 to 16
D4 | ESF | CCS | CAS |
Enable | Disable
Enable | Disable
(see note below)
4 | 5 | 6 | 7 | 8
1 to 9
Value Range