Packet Service Parameters; Ptp Grand Master Common Parameters - Symmetricom TimeProvider 5000 User Manual

Appendix B Specifications and Factory Defaults
Factory Defaults
Table B-29. Packet Service Parameters
Description
Packet Service
Table B-30. PTP Grand Master Common Parameters
Description
PTP IOC1-y Timescale
PTP IOC1-y Clock Identity
PTP IOC1-y Priority 1
PTP IOC1-y Priority 2
PTP IOC1-y Domain
PTP IOC1-y TTL Value
PTP IOC1-y DSCP State
PTP IOC1-y DSCP Value
PTP Sync Limit
PTP Announce Limit
PTP Delay Limit
PTP State
PTP Max Number of Clients
PTP Dither
PTP Profile
PTP Two Step
PTP MGMT Addr Mode
PTP Alternate Master
456 TimeProvider 5000 User's Guide
Default Value
ptp-gm for PTP product
ntp-server for NTP product
Default Value
Auto
MAC-based value
(i.e. FF:FE inserted in the
middle of MAC address)
128
128
4 for ITU-G.8265.1 profile
0 for all other profiles
64
Disable
0
–7
–3
–7
Enable
500 per port
Disable
Telecom-2008
Disable
Unicast
Disable
Value Range
ptp-gm | ptp-probe | ntp-probe |
ntp-server
Value Range
Auto | PTP | Arb
64-bit value
0 to 255
0 to 255
0 to 255
1 to 255
Enable | Disable
0 to 63
–7 to 7
–4 to 4
–7 to 7
Enable | Disable
1 to 500 per port
(or 1000 if bonded ports or
if other port is not running
ptp-gm)
Enable | Disable
telecom-2008 | default |
hybrid | itu-g8265-1
Enable | Disable
Unicast | Multicast
Enable | Disable
098-00028-000 Revision F – May, 2012