Set Gps Command Hierarchy - Symmetricom TimeProvider 5000 User Manual

Chapter 4 Provisioning
Provisioning the Input Reference
Figure 4-20. Set GPS Command Hierarchy
Example
To provision the TimeProvider 5000 for a GPS reference in auto mode, perform the
following steps:
1. Login at the Admin or Config-user level (see
2. Type
set ref mode time
3. Type
set gps mode auto
4. Type
set gps state enable
5. Type
show ref
to Time.
314 TimeProvider 5000 User's Guide
and press Enter.
and press Enter.
and press Enter.
and press Enter to verify that the reference mode has been set
Logging In, on page 275).
098-00028-000 Revision F – May, 2012