Logging In And Out; Adding And Deleting Users; Restoring Default Configuration - Symmetricom TimeProvider 5000 User Manual

Ieee 1588 grand master clock / ntp server
Hide thumbs Also See for TimeProvider 5000:
Table of Contents

Advertisement

Chapter 5 Operating

Logging In And Out

Logging In And Out
The default administrator user name is "admin" with password "symmadmin**"
To login:
tp5000> login
User: <user name>
Password: <password>
To logout:
tp5000> logout

Adding And Deleting Users

Only a security-level admin user can add or delete users.
Users can be added or removed with the following commands:
set user add <username>
set user delete <username>
Saving Present Configuration To Non-volatile Memory
Use the following commands to save IMC module settings to the IOC memory and
to save the active IOC module settings in the IMC memory:
set configuration backup imc-to-ioc
set configuration backup ioc-to-imc

Restoring Default Configuration

The user can restore the TimeProvider 5000 to Symmetricom factory default
values in two ways. The
addresses
set configuration default
The
factory
MGMT port of the IMC
set configuration factory
360 TimeProvider 5000 User's Guide
default
of the MGMT port of the IMC
mode overwrites all user login information and IP addresses
, and is set with the following command:
mode preserves user login information and IP
, and is set with the following command:
098-00028-000 Revision F – May, 2012
of the

Advertisement

Table of Contents
loading
Need help?

Need help?

Do you have a question about the TimeProvider 5000 and is the answer not in the manual?

Subscribe to Our Youtube Channel

Table of Contents

Save PDF