Symmetricom TimeProvider 5000 User Manual page 125

show exp-if status
Use this command to display the status of DTI and Ethernet expansion ports on IMC
card, IO card (DTI only), and expansion shelves.
Command Syntax:
show exp-if status {imc | io | exp[0-9]}
Example 1:
To display the status of DTI and Ethernet on the IMC expansion port
tp5000> show exp-if status imc
Response 1a:
IMC-EXP DTI status
IMC-EXP ETH status
Response 1b:
IMC-EXP DTI status
IMC-EXP ETH status
Example 2:
To display the status of expansion ports on the IO card
tp5000> show exp-if status io
Response 2a:
io-exp-1:
io-exp-2:
Response 2b:
io-exp-1:
io-exp-2:
Example 3:
To display the status of DTI and Ethernet on expansion shelf ID=3 expansion port
tp5000> show exp-if status exp3
Response 3a:
098-00028-000 Revision F – May, 2012
: up
: up
: down
: down
up
disabled
down
up
Chapter 3
TimeProvider 5000 CLI Command Set
TimeProvider 5000 User's Guide 125