Set Snmp Commands; Enabling The Snmp Option - Symmetricom TimeProvider 5000 User Manual

Chapter 4 Provisioning
Provisioning for SNMP
The elements are defined in the activeAlarmTable and activeEventTable objects.
The object activeAlarmTable, 1.3.6.1.4.1.9070.1.2.4.6.2.2.1, is a table containing
the active alarms and can be used to poll the active alarms. The object
activeEventTable, 1.3.6.1.4.1.9070.1.2.4.6.2.2.2, is a table containing the active
events and can be used to poll the active events
The Alarm/Event ID element should be used to determine which alarm or event was
generated. Alarm and Event IDs are listed in Appendix A, System Messages.

Enabling the SNMP Option

SNMP is an optional feature on the TP5000. It must be enabled. To enable this
feature, use the "set option" command with the 40-character key printed on the
Symmetricom-issued certificate for the unit.
Example
To enable the SNMP option, with an option key of
"ABCDEFGHIJ1234567890KLMNOPQRST0987654321":
1. Type then
set option snmp ABCDEFGHIJ1234567890KLMNOPQRST0987654321
press Enter.
Figure 4-36. Set SNMP Commands
098-00028-000 Revision F – May, 2012 TimeProvider 5000 User's Guide 355