Ioc Clock Status - Symmetricom TimeProvider 5000 User Manual

Remarks :See
Level : User, Config, and Admin
Table 3-4. IOC Clock Status
IOC Clock
Status
Warmup This IOC is warming up.
Freerun This IOC is operating
without a reference
Fast-track This IOC has a qualified
input and clock is
stabilizing.
Normal This IOC has a qualified
input and meets all
specifications.
Bridging This IOC no longer has a
qualified reference, but
remains operating within
specification associated
with normal_track
operation.
Holdover This IOC no longer has a
qualified reference
Fail Hardware failure detected
on this IOC
098-00028-000 Revision F – May, 2012
Table 3-4 below for IOC Clock Status descriptions.
Description
Freerun
Fast-track
Freerun
Fast-track
Bridging
Normal-track
Fast-track
Bridging
Holdover
Fast-track
Fast-track
none
TimeProvider 5000 CLI Command Set
Conditions Required
Possible Next
for Next Transition
State
Ref mode = frequency
Warm-up complete
Ref mode = time
GPS qualified
Warm-up complete
Ref mode changed from
frequency to time
Input becomes qualified
This IOC no longer has a
qualified input.
Clock stabilized
Clock not stabilized
adequately
This IOC no longer has a
qualified input.
Bridging time exceeded
Input reference
re-qualified in less than
bridging time.
Input becomes qualified
See Note below.
N/A
TimeProvider 5000 User's Guide 247
Chapter 3
State