Timeprovider E30 E1/1Pps+Tod Expansion Shelf Block Diagram - Symmetricom TimeProvider 5000 User Manual

Chapter 1 Overview
Functional Description
Figure 1-18. TimeProvider E30 E1/1PPS+TOD Expansion Shelf Block Diagram
The following actions must be performed to support the use of expansion shelves
with the TP 5000.
Enable ETH on TP 5000 IMC module's DTI / ETH connector to allow

communication with the expansion shelves
Set a unique ID (0-9) for each expansion shelf using the rotary switch on its front

panel
Enable DTI

– TP 5000 - IMC
– TP 5000 - I/O
– Expansion shelf
Provision output signals for each expansion shelf

Enable state(s) of output(s)

The following actions must be performed to support the use of expansion shelves
with the TP 5000.
Enable ETH on TP 5000 IMC module's DTI / ETH connector to allow

communication with the expansion shelves
Set a unique ID (0-9) for each expansion shelf using the rotary switch on its front

panel
Enable DTI

48 TimeProvider 5000 User's Guide 098-00028-000 Revision F – May, 2012