Symmetricom TimeProvider 5000 User Manual page 199

show pps-tod
This command displays the pps-tod input ports (port1 and port 2) configuration and
status information.
Command Syntax:
To show pps-tod input ports configuration:

show pps-tod config
To show pps-tod input ports status:

show pps-tod status
Example 1:
tp5000>show pps-tod config
Response 1:
PPS-TOD Input Ports Configuration
----------------------------------------------------------------------
| Port ID | State
|.........|.........|..........|.............|...........|...........|
| Port 1
|.........|.........|..........|.............|...........|...........|
| Port 2
|.........|.........|..........|.............|...........|...........|
Example 2:
tp5000>show pps-tod status
Response 2:
PPS-TOD Input Ports Status
098-00028-000 Revision F – May, 2012
| Priority | Cable Delay | PQL State | PQL Value |
| enable | 3
| enable | 4
TimeProvider 5000 CLI Command Set
| 0 | disable
| 0 | disable
TimeProvider 5000 User's Guide 199
Chapter 3
| 1 |
| 1 |