Service Parts Disassembly
Humidity/Temperature Sensor (PL9.1.19)
86
1.
Remove the Rear Cover (page 8-11).
2.
Remove the Right Side Cover (page 8-12).
3.
Remove the Left Side Cover (page 8-13).
4.
Remove the Controller Shield (page 8-92).
5.
Release the Spacer (PL9.1.18) hook and remove the Humidity/
Temperature Sensor.
6.
Disconnect the Humidity/Temperature Sensor connector P/J261.
P/J261
Replacement Note
Replacement Note
Ensure to align the On/Off Power Switch mark with the SW Bracket
(PL9.1.37).
Phaser 6180 Color Laser Printer Service Manual
s6180-046