Phaser 6180 Color Laser Printer Service Manual
3.
The printer must not be tipped or tilted more than 7 mm.
10° or 7 mm
10° or 7 mm
Failure to adhere to the specified mounting specifications will void all
guarantees of print-quality and/or performance. Known problems that can
occur as a result of exceeding the mounting surface specifications are:
■
Color-to-Color mis-registration, primarily in the horizontal (laser scan)
direction.
■
A smear or line of toner approximately 40 mm from the training edge of
the print.
General Information
s6180-262
1-21