Macphy Internal Loop Test Error - Xerox Phaser 6180 Service Manual

Error Messages and Codes

MACPHY Internal Loop Test Error

Applicable Chain Link
Initial Actions
3-106
MACPHY Internal Loop Test error occurs.
■
Chain Link 116-393: MACPHY Int Loop Test Error (Diag Mode)
■
Cycle printer power.
■ If the problem persists, follow the procedure below.
Troubleshooting Reference Table
Applicable Parts
Image Processor Board, PL9.1.27
■
Troubleshooting Procedure Table
Step Actions and Questions
Reboot the printer. Does the error still
1
occur?
2 Reseat the Image Processor Board.
Does the error still occur?
Wiring and Plug/Jack Map References
Yes
Go to step 2.
Replace the
Image
Processor Board
(page 8-89).
Phaser 6180 Color Laser Printer Service Manual
No
Complete.
Complete.