First Print Output Time (Fpot) - Xerox Phaser 6180 Service Manual
Color
Hide thumbs
Also See for Phaser 6180:
- User manual (158 pages) ,
- Quick use manual (6 pages) ,
- Specifications (4 pages)
Table of Contents
Advertisement
First Print Output Time (FPOT)
Phaser 6180 Color Laser Printer Service Manual
First Print Output Time is defined as a time from when the engine receives a
Start signal in Ready state, until a single page is printed and delivered to the
output tray.
The following conditions are applied:
■
The Controller does not keep the print engine waiting
■
The printer is at Standby mode (Laser Unit Motor Off, Fuser Ready)
■
Paper is A size Short Edge Feed (SEF)
■
Process control time is not included
Mode
FPOT (sec.)
Color
As fast as 10.0
Mono
As fast as 10.0
General Information
1-17
Advertisement
Table of Contents
Troubleshooting
Need help?
Do you have a question about the Phaser 6180 and is the answer not in the manual?
Questions and answers
Yellow ink is leaking onto my documents. Is there a way to print by removing the yellow ink cartridge?
blinking green and stays at configuration page. Does print page. If you cancel it gets stuck at cancelling job and never goes from that screen. Powering off for a while and turning back on with same results. Can not set nvram through menu as it says it has a job that is currently running.