Xerox Phaser 6180 Service Manual page 380

Adjustments and Calibrations
Manual Adjustment
6-4
Use the adjustment information in the following table to perform Color
Registration procedure.
Caution
After printing the Color Registration Correction Chart, DO NOT turn Off
the printer until the printer motor has stopped running.
Color Registration Adjustment
Color
Yellow
Magenta
Cyan
1. From the Control Panel, press the Menu button.
2. Press the Up Arrow or Down Arrow button to find
the OK button.
3. Press the Up Arrow or Down Arrow button to find
Press the OK button.
4. Press the Up Arrow or Down Arrow button to find
Press the OK button.
5. Press the Up Arrow or Down Arrow button to find
the OK button.
6. Use the Up Arrow or Down Arrow button to enter the values and the Left
Arrow or Right Arrow button to move from Y to M to C.
7. Press the OK button to save the data. The
displayed.
8. Press the Up Arrow and Down Arrow buttons simultaneously to access
the Color Regi Chart
Chart.
9. The Color Registration adjustment is complete when the straightest Y
(yellow), M (magenta), and C (cyan) lines are next to the "0" line.
Note
If "0" is not next the straightest lines, determine and adjust the values
again.
Range
-9 to +9
-9 to +9
-9 to +9
Enter Number
menu. Press the OK button to print the
Phaser 6180 Color Laser Printer Service Manual
Default
0
0
0
Admin Menu. Press
Maintenance Mode.
Adjust Color Regi.
Enter Number. Press
menu is
Color Regi