Printer Modes
Operational Modes
Phaser 6180 Color Laser Printer Service Manual
Checking
Initializing
Init CRU
Motor Stop
Process Control
Cleaning
Exit Paper
The Phaser 6180 Printer includes the following modes:
■
Diagnostics Mode
The printer is ready to receive diagnostic commands, or the printer
diagnostic function is operating.
■
Wait Mode
The printer is preforming Print Quality adjustment.
■
Ready Mode
The printer is ready for printing.
■
Printing Mode
Printing is in progress.
■
Error Mode
An error is detected in the printer.
■
Initializing Mode
The printer is initializing with a new Developer Unit (new parts have been
installed into the printer).
■
Checking Unit Mode
The printer is checking consumable units.
Power On
Door Close
Unit
CRU Check
Wait
Cleaning
Process Control
Error Occurred
Ready
PFC
Printing
Process Control
&
Registration Control
Wait
Fuser Warming Up
Laser Warming Up
Fuser Cooling Down
Start Feeding
Printing
Feed Jam Occurred
Life Over
Theory of Operation
Door Open
Error
Motor Stop
Printing
& Wait
& Error
Exit Paper
Printing
&
Error
s6180-287
2-49