Parallel Port Error - Xerox Phaser 6180 Service Manual
Color
Hide thumbs
Also See for Phaser 6180:
- User manual (158 pages) ,
- Quick use manual (6 pages) ,
- Specifications (4 pages)
Table of Contents
Advertisement
Error Messages and Codes
Parallel Port Error
Applicable Chain Link
Initial Actions
3-104
Parallel Port error occurs.
■
Chain Link
116-367: Parallel Port Error (IEEE 1284 Data Error)
■
Cycle printer power.
■
If the problem persists, follow the procedure below.
Troubleshooting Reference Table
Applicable Parts
Image Processor Board, PL9.1.27
■
Parallel Cable
■
Troubleshooting Procedure Table
Step
Actions and Questions
Check the Parallel cable connection. Is
1
the cable securely connected?
Does the error still occur?
2
Wiring and Plug/Jack Map References
Yes
Go to step 2.
Replace the
Image
Processor Board
(page 8-89).
Phaser 6180 Color Laser Printer Service Manual
No
Reconnect the
cable. Go to
step 2.
Complete.
Advertisement
Table of Contents
Troubleshooting
Need help?
Do you have a question about the Phaser 6180 and is the answer not in the manual?
Questions and answers
Yellow ink is leaking onto my documents. Is there a way to print by removing the yellow ink cartridge?
blinking green and stays at configuration page. Does print page. If you cancel it gets stuck at cancelling job and never goes from that screen. Powering off for a while and turning back on with same results. Can not set nvram through menu as it says it has a job that is currently running.