Xerox Phaser 6180 Service Manual page 273
Color
Hide thumbs
Also See for Phaser 6180:
- User manual (158 pages) ,
- Quick use manual (6 pages) ,
- Specifications (4 pages)
Table of Contents
Advertisement
Phaser 6180 Color Laser Printer Service Manual
Tray 3 Paper Size
1.
Enter the Service Diagnostic menu (page 4-5).
2.
Perform the Tray 3 Paper Size test:
Paper
Size.
3.
The paper size information is displayed on the Control Panel.
4.
Remove Tray 3.
5.
Verify that the displayed paper size information on the Control Panel
matches with the paper size settings located inside of Tray 3.
Control Panel
Tray 3 Paper Size
Tray 3 Paper Size
Displays the paper size
6.
Press the Cancel button to stop the Tray 3 Paper Size test.
No Tray
Normal
Letter
General Troubleshooting
Engine Diag
>
Sensor Test
>
Tray3
s6180-360
4-39
Advertisement
Table of Contents
Troubleshooting
Need help?
Do you have a question about the Phaser 6180 and is the answer not in the manual?
Questions and answers
Yellow ink is leaking onto my documents. Is there a way to print by removing the yellow ink cartridge?
blinking green and stays at configuration page. Does print page. If you cancel it gets stuck at cancelling job and never goes from that screen. Powering off for a while and turning back on with same results. Can not set nvram through menu as it says it has a job that is currently running.