Xerox Phaser 6180 Service Manual page 591

Phaser 6180 Color Laser Printer Service Manual
Signal Line Name
TRAY SEN
Rxd
Txd
TURN CL ON (L) +24 VDC
FEED CL ON (L) +24 VDC
PAPER SIZE SW 1 ON (L)
+3.3 VDC
PAPER SIZE SW 2 ON (L)
+3.3 VDC
PAPER SIZE SW 3 ON (L)
+3.3 VDC
FEED MOT ON
FEED MOT ALARM
FEED MOT CLK
FEED MOT LOW
Outline of Optional Size Switch
The paper size is determined by a combination of the On/Off statuses of the
SW 1, SW 2, and SW 3 switches of Optional Size Switch.
Paper Size
Letter (SEF)
A4 (SEF)
A5
B5 (SEF)
Legal 13" (SEF)
Legal 14" (SEF)
Executive (SEF)
No Tray
Note
The Actuator is pushing the Size Switch.
Plug/Jack and Wiring Diagrams
Description
Controls signal of the Optional Feeder Board.
On/Off signal of the Optional Turn Clutch.
Paper detects signal of the Feeder by the Photo Sensor
(Tray 3 No Paper Sensor).
On/Off signal of the Optional Size Switch.
Drives control signal of the Optional Feeder Drive.
Switches
SW 1 SW 2
Off Off
Off On
Off On
On Off
On On
On On
On Off
Off Off
SW 3
On
On
Off
Off
Off
On
On
Off
10-51