Xerox Phaser 6180 Service Manual page 215

Phaser 6180 Color Laser Printer Service Manual
Troubleshooting Procedure Table (continued)
Step Actions and Questions
7 Check the Right Side Harness for
continuity.
1. Disconnect P/J22 and P/J222.
2. Check continuity between P/J22 <=>
P/J252.
Check the Main Drive signal.
8
1. Disconnect P/J22 from the MCU
Board.
2. Are there +24 V across ground <=>
J22-B2/J22-B4 when the Interlock
Switch is activated?
Error Messages and Codes
Yes No
Go to step 8. Replace the
Right Side
Harness.
Replace the Replace the
Main Drive MCU Board
(page 8-73). (page 8-87).
3-89