Humidity Sensor (Pl9.1.19) - Xerox Phaser 6280 Service Manual

Humidity Sensor (PL9.1.19)

Phaser 6280 Color Laser Printer Service Manual
1. Remove the Rear Cover (page 8-12).
2. Remove the Right Side Cover (page 8-13).
3. Remove the Left Side Cover (page 8-14).
4. Remove the I/P Board Shield (page 8-96).
5. Remove the MCU Board Shield (page 8-94).
6. Release the Spacer (PL9.1.18) hook and remove the Humidity Sensor.
7. Disconnect the Humidity Sensor wiring harness connector P/J261.
Service Parts Disassembly
P/J261
s6280-240
8-85