Xerox Phaser 6180 Service Manual page 254

General Troubleshooting
4-20
Service Diagnostic Test Table (continued)
Test Control Panel Display
Pixel Counter Pixel Counter
Y: nn.n
■
C: nn.n
■
M: nn.n
■
K: nn.n
■
<Press the Set or Cancel
button to move one level
up the menu>
Configuration Configuration
(Do not use -
Dip Switch0
■
for
00000000 *
■
Development
Dip Switch1
■
Only)
00000000 *
■
Dip Switch2
■
00000000 *
■
Dip Switch3
■
00000000 *
■
Counter Type Counter Type
Type1*
■
Type2
■
Type3
■
Type4
■
<Press the Up or Down
button to change counter
type>
<Press the Set button to
save the setting>
<Press the Cancel button
to move one level up the
menu>
Test Description
Displays the ratio (% used) of the
number of pixel per C/M/Y/K counted
by the Controller to A4 size area except
4 mm area from the edge on the last
page print.
100% = empty print cartridge
■
The value is rounded off to one decimal
place.
For B/W print, only K is displayed.
The ranges are from 0-100% for each
color (CMYK).
Operates the DIP switch on NVRAM of
the Controller.
Available values are 0 and 1.
Note: This information is initialized by
Clear All NVM.
Sets counter type from 1-4.
Note: When the Counter Type has been
changed, an "*" is displayed next to
the text.
Phaser 6180 Color Laser Printer Service Manual