Main Fan (Pl9.1.10) - Xerox Phaser 6180 Service Manual

Service Parts Disassembly

Main Fan (PL9.1.10)

84
1. Remove the Rear Cover (page 8-11).
2. Remove the Right Side Cover (page 8-12).
3. Remove the Left Side Cover (page 8-13).
4. Remove the Top Cover (page 8-14).
5. Disconnect the Main Fan connector P/J503 on the LVPS (PL9.1.4).
6. Release the Main Fan wiring harness from the Clamp.
7. Remove 2 screws (35 mm) securing the Main Fan to the Main Fan Duct.
8. Remove the Main Fan.
P/J503
Replacement Note Replacement Note
When installing the Fan, ensure the labeled surface faces toward the
front of the printer.
Label
Phaser 6180 Color Laser Printer Service Manual
s6180-049