Temperature/Humidity Harness (Pl3.2.1) And Sensor (Pl3.2.2) - Xerox Phaser 6250 Service Manual

Temperature/Humidity Harness (PL3.2.1) and Sensor
(PL3.2.2)
1.
Remove the Top Main Cover(page 8-9).
2.
Remove the Left Side Cover (page 8-11).
3.
Disconnect P/J2361 (gray) from the printer.
4. Remove the screw securing the Temperature/Humidity Sensor (item #1) and
remove the sensor.
Replacement Notes
Note
Seat the sensor onto the Guide Pins with needle nose pliers then re-insert the
screw. Reconnect connector P/J2361.
8-24
LEFT
Phaser 6250 Color Laser Printer Service Manual
P/J2361
1
6250-142