Xerox Phaser 6180 Service Manual page 265

Phaser 6180 Color Laser Printer Service Manual
CRU Sensor Y (Yellow Toner Cartridge Sensor)
Caution
When performing this procedure, remove and cover the Print Cartridges
to avoid exposure to light.
1. Enter the Service Diagnostic menu (page 4-5).
2. Open the Front Cover.
3. Remove the Transfer Unit (page 8-7).
4. Remove the Print Cartridges (page 8-9).
5. Perform the CRU Sensor Y test:
Sensor
6. Install and remove the Yellow Print Cartridge while checking the
information on the Control Panel display. The Low and High values
change from 0 up to 99.
Operator Panel
7. Press the Cancel button to stop the CRU Sensor Y test.
Y.
Normal
CRU Sensor Y
L-0
General Troubleshooting
Engine Diag > Sensor Test
CRU Sensor Y
H-0
> CRU
s6180-345
4-31