Xerox Phaser 6180 Service Manual page 264

General Troubleshooting
Interlock Switch
4-30
Caution
When performing this procedure, remove and cover the Print Cartridges
to avoid exposure to light.
1. Enter the Service Diagnostic menu (page 4-5).
2. Open the Front Cover.
3. Remove the Transfer Unit (page 8-7).
4. Remove the Print Cartridges (page 8-9).
5. Perform the Interlock Switch test:
Interlock Switch.
6. Open and close the Front Door while checking the information on the
Control Panel display. The Low and High values change from 0 up to 99.
Control Panel
Interlock Switch
L-0
7. Press the Cancel button to stop the Interlock Switch test.
Engine Diag > Sensor Test
Normal
Interlock Switch
H-0
Phaser 6180 Color Laser Printer Service Manual
>
s6180-344