Right Side Cover (Pl1.1.6) - Xerox Phaser 6180 Service Manual

Service Parts Disassembly

Right Side Cover (PL1.1.6)

8-12
1. Remove the Rear Cover (page 8-11).
2. Remove 3 screws (10 mm) securing the Right Side Cover.
3. Use a flat tip screwdriver to release the plastic tabs from the notches on
the top and rear sides of the printer frame.
4. Push the Right Side Cover at an angle toward the rear to remove it.
Tabs
Replacement Note
Align the Right Side Cover
on the inside of the
Front Cover.
Replacement Note Replacement Note
Insert the top and bottom tabs of the Right Side Cover at an angle in
order to fit the Right Side Cover in the correct position.
Lock Lever
Tab
Phaser 6180 Color Laser Printer Service Manual
s6180-021