Xerox Phaser 6180 Service Manual page 544

Plug/Jack and Wiring Diagrams
10-4
Print Engine Plug/Jack Designators (continued)
P/J Map Coordinates
J211 1 H-107
J220 1 F-106
J221 1 H-108
J222 1 G109
J231 2 I-125
J232 2 H-125
J233 2 H-123
J234 2 I-124
J235 2 H-123
J236 1 H-111
J241 2 I-125
J251 1 H-110
J261 4 H-152
J272 1 I-110
J273 2 H-126
J275 1 I-108
J276 1 I-109
J311 2 G-124
J312 2 G-123
J313 2 G-122
J314 2 G-122
J401 3 F-138
J481 4 E-154
J501 4 F-149
J502 4 F-149
J503 4 F-149
J504 4 F-149
Remarks
Connects Main Drive (Main Motor) and Right Side
Harness.
Connects Control Panel and Control Panel Harness.
Connects Main Drive (Sub Motor) and Right Side
Harness.
Connects Main Drive (Developer Motor) and Right
Side Harness.
Connects Size Switch and Right Side Harness.
Connects Feeder Unit (Registration Sensor Harness)
and Right Side Harness.
Connects Registration Clutch and Right Side
Harness.
Connects Feeder (Turn Clutch) and Right Side
Harness.
Connects Feed Clutch with Right Side Harness.
Connects Tray 1 (MPT) Feed Solenoid with Right
Side Harness.
Connects OHP Sensor Harness with OHP Harness
(not used on 6180).
Connects Drive Assembly (Tray 2 Motor) with Right
Side Harness.
Connects Humidity/Temperature Sensor and
Humidity/Temperature Harness.
Connects Front Cover Harness and Right Side
Harness.
Connects Right Side Harness and Optional-550
Sheet Feeder (Feeder Unit Harness).
Connects Tray 1 (MPT) No Paper Harness and Right
Side Harness.
Connects Exit Clutch Harness and Right Side
Harness.
Connects CRUM Sensor (Y) and CRUM Harness.
Connects CRUM Sensor (M) and CRUM Harness.
Connects CRUM Sensor (C) and CRUM Harness.
Connects CRUM Sensor (K) and CRUM Harness.
Connects Image Processor Board and Top Low
Voltage Harness.
Connects Power Switch and Inlet Harness.
Connects LVPS and Top Low Voltage Harness.
Connects LVPS and Top Low Voltage Harness.
Connects LVPS and Top Low Voltage Harness.
Connects LVPS and Relay Test Harness.
Phaser 6180 Color Laser Printer Service Manual