Xerox Phaser 6180 Service Manual page 420

Hide thumbs Also See for Phaser 6180:

Table of Contents

Service Parts Disassembly

Use a screwdriver to release the hook on the Size Set Switch (PL2.2.19)

and remove the Switch from Tray 2.

Pull the Bottom Plate Shaft out toward the left from the Bottom Plate and

remove the Stopper (PL2.2.3) and the Bottom Oneway Lock Gear

Release the notches on the Bottom Plate from the hooks on the Tray

Housing Base and remove the Bottom Plate.

Replacement Note

Ensure the Bottom Plate Release Actuator is shifted to release the

Lock and the Bottom Plate is raised at its highest position.

Phaser 6180 Color Laser Printer Service Manual

Troubleshooting