Calibrations; Initializing Print Meter; Initializing Nvm (Nvram) - Xerox Phaser 6180 Service Manual

Adjustments and Calibrations

Calibrations

Initializing Print Meter

Initializing NVM (NVRAM)

6-6
This process initializes the Print Meter.
1. From the Control Panel, press the Menu button.
2. Press the Up Arrow or Down Arrow button to find
the OK button.
3. Press the Up Arrow or Down Arrow button to find
Press the OK button.
4. Press the Up Arrow or Down Arrow button to find
the OK button.
5. Are you sure? message is displayed. Press the OK button to start the
process.
6. Initialized message is displayed. The
PrintMeter menu is displayed when the process is completed.
This process initializes the settings stored in the NVRAM except for the
network settings. The NVRAM is a non-volatile memory that stores the printer
settings even after the power is turned Off. After executing this function and
restarting the printer, all the menu parameters are reset to their default values.
1. From the Control Panel, press the Menu button.
2. Press the Up Arrow or Down Arrow button to find
the OK button.
3. Press the Up Arrow or Down Arrow button to find
Press the OK button.
4. Press the Up Arrow or Down Arrow button to find
the OK button.
5. Are you sure? message is displayed. Press the OK button to start the
process.
6. Initializing... --> Initialized
7. The Maintenance Mode - Initialize NVM
process is completed.
8. Turn the printer power Off and back On.
Admin
Maintenance
Init
Maintenance Mode - Init
Admin
Maintenance
Initialize
messages are displayed.
menu is displayed when the
Phaser 6180 Color Laser Printer Service Manual
Menu. Press
Mode.
PrintMeter. Press
Menu. Press
Mode.
NVM. Press