Ac Power Supply Troubleshooting - Xerox Phaser 6180 Service Manual

AC Power Supply Troubleshooting

Phaser 6180 Color Laser Printer Service Manual
Troubleshooting Reference Table
Applicable Parts
LVPS, PL9.1.4
■
Troubleshooting Procedure Table
Step Actions and Questions
1 Check the voltage at the AC wall outlet. Is
there approximately 110 VAC (or 220 VAC if
the printer is a 220 V configuration) at the
AC wall outlet?
Check the power cord for defects or a loose
2
connection. Is the power cord loose or
defective?
General Troubleshooting
Wiring and Plug/Jack References
"DC Power Supply" on page 10-30
■
Yes
Go to step 2.
Replace or
reconnect the
power cord.
No
Notify the
customer of
improper AC
output from
the outlet.
Replace the
LVPS
(page 8-81).
4-69