Configuration, Memory, And Firmware Errors; Control Panel Language Set Unsupported - Xerox Phaser 6180 Service Manual

Configuration, Memory, and Firmware Errors

Control Panel Language Set Unsupported

Phaser 6180 Color Laser Printer Service Manual
The Control Panel does not support the language.
Applicable Chain Link
■
Chain Link
Initial Actions
■ Cycle printer power.
■
If the problem persists, follow the procedure below.
Troubleshooting Reference Table
Applicable Parts
MCU Board, PL9.1.20
■
Troubleshooting Procedure Table
Step Actions and Questions
Turn the printer power Off and back
1
On. Does the error still occur?
016-610: Control Panel Language Set unsupported
Wiring and Plug/Jack Map References
Error Messages and Codes
Yes No
Replace the Complete.
MCU Boar
(page 8-87).
3-69