Xerox Phaser 6180 Service Manual page 262

General Troubleshooting
Exit Sensor
4-28
Warning
Ensure to wait for the Fuser to cool down before starting the procedure.
1. Enter the Service Diagnostic menu (page 4-5).
2. Open the Front Cover.
3. Remove the Transfer Unit (page 8-7).
4. Perform the Duplex Jam Sensor test:
Sensor.
5. Move the Sensor up and down and check the information on the Control
Panel display. The Low and High values change from 0 up 99.
Control Panel
Exit Sensor
L-0
6. Press the Cancel button to stop the Exit Sensor test.
Engine Diag > Sensor Test
Normal
Exit Sensor
H-0
Phaser 6180 Color Laser Printer Service Manual
> Exit
s6180-342