Service Parts Disassembly
Main Fan (PL9.1.10)
8-82
1.
Remove the Rear Cover (page 8-12).
2.
Remove the Right Side Cover (page 8-13).
3.
Remove the Left Side Cover (page 8-14).
4.
Remove the Top Cover (page 8-15).
5.
Disconnect the Main Fan wiring harness connector P/J503 on the LVPS
(PL9.1.4).
6.
Release the Main Fan wiring harness from the clamps on the LVPS Shield
(PL9.1.9).
7.
Remove 2 screws (30 mm) securing the Main Fan to the printer.
8.
Remove the Main Fan from the printer.
P/J503
Replacement Note
Replacement Note
When installing the Fan, ensure the labeled surface faces toward the
front of the printer.
Phaser 6280 Color Laser Printer Service Manual
s6280-237