Dynamic Routing Configuration - Oracle ZFS Storage Appliance Administration Manual

Changing Account Information (BUI)
Refer to "How To Manage and Approve Pending ASR Assets In My Oracle Support" (Doc ID
1329200.1).
Phone Home Properties
If the appliance is not directly connected to the Internet, you may need to configure an HTTP
proxy through which the Phone Home service can communicate with Oracle. These proxy
settings will also be used to upload support bundles. See
Oracle ZFS Storage Appliance Customer Service Manual
TABLE 85
Property
Use web proxy
Host : port
Username
Password
TABLE 86
Property
Last heartbeat sent at
If the Phone Home service is enabled before a valid Oracle Single Sign-On account has been
entered, it will appear in the maintenance state. You must enter a valid Oracle Single Sign-On
account to use the Phone Home service.
There is a log of Phone Home events in Maintenance > Logs > Phone Home.

Dynamic Routing Configuration

The Routing Information Protocol (RIP) is a distance-vector dynamic routing protocol that is
used by the appliance to automatically configure optimal routes based on messages received
from other RIP-enabled on-link hosts (typically routers). The appliance supports both RIPv1
and RIPv2 for IPv4, and RIPng for IPv6.
Routes that are configured via these protocols are marked as type "dynamic" in the routing
table. RIP and RIPng listen on UDP ports 520 and 521 respectively.
320 Oracle ZFS Storage Appliance Administration Guide, Release OS8.6.x • September 2016
Phone Home Web Proxy Settings
Phone Home Status
"Working with Support Bundles" in
for more details on support bundles.
Description
Connect via a web proxy
Web proxy hostname or IP address, and port
Web proxy username
Web proxy password
Description
Time last heartbeat was sent to Oracle support