Adding A Disk Shelf To An Existing Storage Pool (Cli) - Oracle ZFS Storage Appliance Administration Manual

Hide thumbs Also See for ZFS Storage Appliance:
Table of Contents

Advertisement

Adding a Disk Shelf to an Existing Storage Pool (CLI)

For log devices, click Log Profile and select either the mirrored or striped profile. If you
allocated an even number of log devices to the pool, select the mirrored profile.
Caution -
highly recommended to configure a mirrored log profile for added redundancy. For more
information, see
For cache devices, the profile is always striped, as shown under Cache Profile.
10.
Click COMMIT.
Related Topics
"Unconfiguring a Storage Pool (BUI)" on page 103
"Adding a Cache or Log Device to an Existing Storage Pool (BUI)" on page 98
Adding a Disk Shelf to an Existing Storage Pool
(CLI)
Use the following task to add a disk shelf to an existing storage pool.
For recommendations on how many drives to select per pool, as well as other considerations
Before You Begin
and guidelines, see
You must select the same data profile currently used in the existing pool. To understand the
different data profiles, see
If there is insufficient storage to configure the system for the data profile and its options,
some attributes may not be supported. For example, it is impossible to preserve NSPF
characteristics when adding a single disk shelf to a double parity RAID configuration with
the NSPF option. You can add the disk shelf, but cannot use the NSPF option.
Do not perform a pool configuration operation while a disk firmware upgrade is occurring.
To check if an upgrade is in progress, navigate to maintenance system updates.
Caution -
pool entirely and losing all data.
1.
Install the new disk shelf using
Appliance Customer Service
2.
Go to configuration storage.
96
Oracle ZFS Storage Appliance Administration Guide, Release OS8.6.x • September 2016
A double failure can cause loss of data from a log in a striped configuration. It is
"Data Profiles for Storage Pools" on page
"Storage Pool Concepts" on page
"Data Profiles for Storage Pools" on page
Once a disk has been added to a pool, it cannot be removed without destroying the
Manual.
111.
109.
"Adding a New Disk Shelf" in Oracle ZFS Storage
111.

Advertisement

Table of Contents
loading

Table of Contents